This rear end differential cover fits the Ford 7.5 ring gear. Some possible applications are:
- Bronco II, 1984 to 1990
- Ranger, 1983 to 2012 (the 4.0L engine Rangers usually have the larger 8.8 inch rear)
- Mustang, 1982 to 1986
- Aerostar, 1986 to 1997 and minivans
- Mazda B2300, 1994 and newer
- Mazda B3000, 1994 and newer
Always check your truck to verify differential and look for clearance. Configurations vary. This cover is larger than stock so make sure you have space for a larger cover.
This cover may also fit some minivans, Crown Vics, Grand Marquis cars, and Thunderbirds. The Ford 7.5 stock cover is about 9.75 inches vertically. Some models may have the larger Ford 8.8 differential (PML part numbers 7064 and 9519), which is more rectangular in shape and longer (vertically). Please check carefully which differential your vehicle has and if you have clearance.
Number of Bolts: 10 bolts
Volume: 0.4 quarts over stock, approximately
Dimensions: Click here for dimensions.
Benefits:
- Drain hole and magnetic drain plug
- Extra capacity
- Only 0.3 inches deeper than stock cover
- Patterned fins for heat dissipation and a custom look
- Heavy duty sand cast aluminum construction
- Thick walls and gasket flanges to provide a uniform clamping force on the gasket surface for a secure seal
- Optionally, can be machined on face of cover for a temperature sending unit
PML makes two covers for the Ford 7.5 inch (7½") ring gear differential. PML Part Number 7043 has a straight fin design and a round shape.
Optional Machining for Temperature Sending Unit
Click on image to view larger.
On the inside of this cover (see image) there is an oval pad, which provides a thick area in the front face of the casting that can be drilled and tapped for a temperature sending unit.
This is an option and machining charges apply. Verify your aftermarket sending unit thread specifications before selecting this in the shopping cart.
PML Differential Cover Compared to Stock
Click on image to view larger in a new tab or window.
This image compares the depth of both PML Ford 7.5, 10 bolt differential covers and the stock cover. Click on image to view larger in a new tab or window.
