- 2015 and newer Ford F150
Always check your vehicle to verify your differential and clearance. Configurations vary.
Some Mustangs and other Ford or Mercury vehicles may also have this new differential and be able to use this cover.
Some F-150 trucks have the larger Ford 9.75 (9 3/4) inch ring gear rear differential, which also has 12 bolts, but a different shape.
Number of Bolts: 12 bolts
Volume: about 0.75 quarts over stock
Dimensions: Click here for dimensions.
PML designed this cover for 2015 and newer Ford F-150 trucks with the new Ford 8.8 inch Super or HD; rear differential.
Some Mustangs and other Ford or Mercury vehicles may also have this new differential and be able to use this cover.
Benefits:
- Bolt on replacement for stock cover
- Additional 3/4 quart capacity over stock
- Fins for dissipating heat
- Pads for using stock clips to keep lines routed above differential in place
- Drain hole and a magnetic drain plug included for easy servicing
- Fill hole on side
- Heavy duty sand cast aluminum construction
- Hardware included
- Can be drilled and tapped for a temperature sensor (optional)
Fill and Level Check
Level check is on the carrier. To fill, add fluid through fill hole on the side of the cover. Stop adding once fluid starts to dribble out level check hole.
Optional Machining for Temperature Sending Unit
This cover has a location for a temperature sensor on the right side of the cover. Optionally, it can be machined for a 1/8 NPT. There is a machining charge for PML to drill and tap the hole.
Inside of Cover
Click on image to view larger.
PML Differential Cover Compared to Stock
Click on image to view larger in a new tab or window.
From left to right: Stock Cover on an F150, New PML Cover on an F150. Click on image to view larger.
