Trucks and SUVs, such as F150, Explorer, Expedition, and Mercury Mountaineer, and some cars have clearance and can benefit from the extra fluid of a deep pan. Examples of vehicles that may be able to use this pan:
- 1992 to 2004 Ford trucks
- 1994 to 2004 Ford Explorer and Expedition
- 1992 to 2004 Ford vans
- 1992 to 2004 Ford Crown Victoria
- 1992 to 2004 Lincoln Town Cars and limos based on it
- 1997 to 2001 Mercury Mountaineer
There are many configurations so please check your vehicle to verify transmission and clearance.
Cars, such as Mustang, Thunderbird, Cougar and Mark VII, may need the PML stock capacity pan, part number 9324-2 because many cars do enough ground clearance for a deep pan.
Lincoln Town Cars and limos based on the Town Car have installed this pan. Work vehicles like limousines appreciate the easier maintenance and extra capacity for cooling to extend the transmission life.
Installation Note: On some vehicles, the transmission cross member and mount must be temporarily removed so that you can drop the stock pan and install the PML pan. After installing the PML pan, be sure to reassemble. Thanks to Rick who provided this tip after installing this pan on his 2002 F–150 with the 4R70W transmission.
Shift Lever Note: A customer with a 1967 Ford F-250 TCI AODE transmission noticed that thickness of the PML pan did not allow the shift lever full range of motion. He took the lip back about a 1/4 inch across a 1.5 inch line to get full range of the shift lever.
Volume: 2 quarts over stock
Dimensions: Click here for dimensions. 
Number of Bolts: 14
PML designed this transmission pan for 1990s and 2000s 2WD and 4WD Ford vehicles with automatic overdrive 4 speed transmissions.
Benefits:
- Extra capacity
- Fins for heat dissipation
- Heavy duty sand cast aluminum construction
- Thick gasket flange machined flat for a secure seal
- Drain hole and magnetic drain plug included
The first version of this transmission (the AOD) have one bolt hole in a slightly different location than the 1992/93 and later versions (AODE, 4R70, 4R70W, 4R70E, 4R75E, 4R75W). Please select the transmission you have from the drop down menu.
For more information on differences between these 4 speed Ford transmissions, click here.
Filter and Gasket
PML recommends cork or cork composite gasket.
Filter requirements: For this PML pan, use the AODE, 4R70, 4R75 4WD (Deep) filter. Deep filters have metal pick-up tube.
Information for reference only. Installer should verify appropriate transmission and filter and fitment based on the individual vehicle.
Inside of Pan
Image shows the inside of the PML pan.
Click on image to view larger.
The three round posts in the bottom of the pan are supports for the filter. These are cast into the pan. PML designed this pan with the filter supports to hold the the 4WD filter in place.
Optional Temperature Sending Unit Machining
Optionally, this pan can be machined for a temperature sending unit. There is a boss on the passenger/right side of the pan for this.
If you would like PML to drill and tap hole, the machining charge is per hole. A plug for the hole is included.
The standard size is 1/8 NPT. Call or email if you need a different size.
PML Transmission Pan Compared to Stock
Click on image to view larger in a new tab or window.
