Ford AOD, AODE, 4R70E, 4R70W, 4R75E, 4R75W Stock Capacity Transmission Pan

Retail Price: $380.25
Price: $292.50 ea
  • SKU9324AC
- +
Other products by PML

This transmission pan fits the AODE, 4R70 (4R70W , 4R70E), and 4R75 (4R75W, 4R75E) transmission. These transmissions are found on 1992 to 2005 Ford trucks, SUVs, cars, and vans.

If your vehicle has the stock pan with the bump that hangs down in the middle, the PML deep transmission pan, Part Number 9685-2, may fit. The stock pan with the bump is sometimes called the "4WD" transmission pan even thought is was used on 4WD and 2WD vehicles.

Since this is a stock capacity pan, it has more ground clearance than a deep transmission pan. Examples of vehicles that might have ground clearance limitations and need a stock capacity pan:

  • 1996 to 2004 Ford Mustang
  • 1994 to 1997 Ford Thunderbird
  • 1993 to 1998 Lincoln Mark VIII
  • 1993 to 2004 Lincoln Town Car
  • 1994 to 1997 Mercury Cougar
  • 1995 to 2004 Mercury Grand Marquis
  • 2003 Mercury Marauder

Usually, F150 trucks, Explorer and Expedition SUVs, and Crown Victoria cars have plenty of ground clearance for the PML deep pan, part number 9685-2.

Vehicle configurations vary so always check to verify the transmission and space available for a larger transmission pan

Volume: stock capacity

Dimensions: Click here for dimensions. 

Number of Bolts: 14

  • Heavy duty sand cast aluminum construction
  • Raised fins on bottom for heat dissipation
  • Thick wall construction to add strength to the transmission case
  • Thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal
  • Boss cast into pan can be machined for a temperature sensor
  • Drain hole and magnetic drain plug for easier maintenance

For information on differences between AOD, AODE, 4R70 (4R70W , 4R70E), and 4R75 (4R75W, 4R75E) transmissions, click here.

The AOD transmission needs a different pan. PML part number 9324-1 is for the older AOD transmission. The bolt hole pattern is different.

Filter and Gasket

PML designs our pans to work with easily available filters and gaskets. PML does not sell filters or gaskets for this transmission. The stock 2WD AODE, 4R70 filter and a paper, cork, or cork composite gasket will work well with our pan. PML does not recommend a hard rubber reusable gasket for this pan.

Filter Requirement: You must use a 2WD AODE filter with this pan. 4WD AODE and all 4R70 filters will not fit.

Customers have reported to us that Motocraft FT 100 and ATP FT–118 filter kit work great with this pan, PML part number 9324-2, for the AODE, 4R70E, 4R70W, 4R75E, 4R75W transmission.

Optional Temperature Sending Unit Machining

Optionally, this pan can be machined for a temperature sending unit. There is a boss on the passenger/right side of the pan for this.

If you would like PML to drill and tap hole, the machining charge is  per hole. A plug for the hole is included.

The standard size is 1/8 NPT. Call or email if you need a different size.

PML Transmission Pan Compared to Stock

PML Transmission Pan Part Numbers 9324-1/2 and 9685-1/2 compared to stock   PML Transmission Pan Part Number 9324-1/2 and 9685-1/2 compared to stock, top view
Click on image to view larger in a new tab or window.